Engine Horsepower: 32 hp
Manufactured: 2013+
John Deere 2032R Summary
The John Deere 2032R was produced from 2013 to 2024. It is part of the 2R Series of compact utility tractors and is manufactured in Augusta, Georgia, USA. This tractor features an engine with 31.7 horsepower (gross) and 32 horsepower, while the PTO claims 23.5 horsepower.

John Deere 2032R Horsepower, Weight, and Specifications:
General Information
What are the general details of the John Deere 2032R?
- Manufacturer: John Deere
- Model: 2032R
- Series: 2R Series
- Type: Compact Utility Tractor
- Production Years: 2013 to 2024
- Factory Location: Augusta, Georgia, USA
- Original Price: $18,595 (2013), $19,339 (2014)
Engine
What is the engine type of the John Deere 2032R?
- Type: Yanmar 1.6L 3-cylinder diesel
Transmission
What type of transmission does the John Deere 2032R have?
- Type: Hydrostatic
Horsepower
What is the horsepower of the John Deere 2032R?
- Engine (gross): 31.7 hp / 23.6 kW
- Engine: 32 hp / 23.9 kW
- PTO (claimed): 23.5 hp / 17.5 kW
Mechanical
What are the mechanical features of the John Deere 2032R?
- Drive: Four-wheel drive
- Final Drives: Spur gear
- Differential Lock: Standard
- Steering: Power steering
- Brakes: Wet disc brakes
- ROPS: Two-post folding ROPS
Capacity
What are the capacity specifications of the John Deere 2032R?
- Fuel: 7.1 gallons / 26.9 liters
- Hydraulic System: 3.9 gallons / 14.8 liters
- Front Axle: 0.9 quarts / 0.9 liters
Hydraulics
What hydraulic system does the John Deere 2032R have?
- Type: Open center
- Capacity: 3.9 gallons / 14.8 liters
- Pressure: 2421 psi / 166.9 bar
- Mid Valves: 2
- Pump Flow: 5.0 gpm / 18.9 lpm
- Total Flow: 10.5 gpm / 39.7 lpm
- Steering Flow: 5.5 gpm / 20.8 lpm
Tractor Hitch
What are the hitch specifications of the John Deere 2032R?
- Rear Type: I
- Control: Position control
- Rear Lift (at ends): 1433 lbs / 650 kg
- Rear Lift (at 24\"/610mm): 1250 lbs / 567 kg
Power Take-off (PTO)
What are the PTO specifications of the John Deere 2032R?
- Rear PTO: Independent
- Clutch: Wet disc
- Rear RPM: 540
- Mid PTO: Independent
- Mid RPM: 2100
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 2032R?
- Wheelbase: 65.2 inches / 165 cm
- Weight: 1973 lbs / 894 kg
Electrical
What are the electrical specifications of the John Deere 2032R?
- Ground: Negative
- Charging System: Alternator
- Charging Amps: 40
- Charging Volts: 12
- Battery CCA: 500
- Battery Volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.