Engine Horsepower: 25 hp
Manufactured: 2011 to 2013
John Deere 1026R Summary
The John Deere 1026R is a sub-compact utility tractor produced from 2011 to 2013. It is powered by a 25.2 hp Yanmar 1.1L 3-cylinder diesel engine. The tractor was manufactured in Augusta, Georgia, USA.

John Deere 1026R Horsepower, Weight, and Specifications:
Production
Who manufactured the John Deere 1026R, and where was it built?
- Manufacturer: John Deere
- Type: Sub-Compact Utility tractor
- Built in: Augusta, Georgia, USA
- Original price: $12,595 in 2011
Engine
What type of engine does the John Deere 1026R have?
- Engine: Yanmar 1.1L 3-cyl diesel
Transmission
What type of transmission does the John Deere 1026R use?
- Type: hydrostatic
Horsepower
What is the horsepower of the John Deere 1026R?
- Engine (gross): 25.2 hp / 18.8 kW
- Engine (net): 23.8 hp / 17.7 kW
- PTO (claimed): 18 hp / 13.4 kW
Mechanical
What are the mechanical features of the John Deere 1026R?
- Drive: Four-wheel drive
- Final drives: spur gear
- Differential lock: mechanical rear
- Power steering: yes
- Brakes: disc brakes
- ROPS: Two-post ROPS
Capacity
What is the fuel and hydraulic capacity of the John Deere 1026R?
- Fuel capacity: 5.6 gal / 21.2 L
- Hydraulic system capacity: 3.25 gal / 12.3 L
Hydraulics
What are the hydraulic specifications of the John Deere 1026R?
- Type: open center
- Capacity: 3.25 gal / 12.3 L
- Pressure: 2000 psi / 137.9 bar
- Valves: 2 to 3
- Total flow: 6.3 gpm / 23.8 lpm
Tractor hitch
What are the hitch specifications for the John Deere 1026R?
- Rear Type: Limited I
- Control: position control
- Rear lift (at ends): 1433 lbs / 650 kg
- Rear lift (at 24\"/610mm): 681 lbs / 308 kg
Power Take-off (PTO)
What are the PTO specifications for the John Deere 1026R?
- Rear PTO: independent
- Rear RPM: 540
- Engine RPM: 540@3200
- Mid PTO: independent
- Mid RPM: 2100
- Engine RPM: 2100@3200
Dimensions & Tires
What are the dimensions and weight of the John Deere 1026R?
- Wheelbase: 57.1 inches / 145 cm
- Weight: 1444 lbs / 654 kg
Electrical
What are the electrical specifications of the John Deere 1026R?
- Ground: negative
- Charging system: alternator
- Charging amps: 40
- Battery CCA: 500
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.