Transform your overgrown fields with the Winton WFL145 1.45m PTO Flail Mower, designed for efficiency on uneven ground and adept at providing a high-quality lawn finish.
Fixed Offset
25 - 50 hp
145 cm
284 kg
Included
Included
Brand
Winton Machinery
Reference (SKU)
WFL145
Weight
284kg
Dimensions
160 x 85 x 95 cm
Tractor HP Required (range)
25-50HP
Cutting Heights
3-8cm
Working Width
145cm
Number of Blades
24
Lower Linkage Width
60cm
Linkage Type
Category 1
Oil Type
Gear 80W90
PTO Shaft
Included FREE of charge
Warranty
12 months manufacturer's warranty
Winton flail mowers are designed to power through thick brambles, dense weeds, saplings and long grass. They can also leave a neat finish on regularly cut grass.
Professional-grade machines are built tough and use premium components. In additional to being exceptionally reliable, they achieve great results and are very efficient.
The chassis is constructed from thick steel and is built to be easy to maintain and repair. They feature higher quality bearings, blades and gearboxes over many rival models.
Winton gearboxes are heavy-duty and robustly made. They are highly reliable and significantly larger than other machines in their price bracket, allowing more power to be transferred through them.
The heavy hammer blades are arranged spirally for an efficient cut. These blades will smash through dense vegetation and brambles and also give you a neat finish on fine grass when used regularly.
Enter your tractor's horsepower or the make & model to see which models fit.
Compatibility assumes a standard PTO speed of 540RPM clockwise, a Type 1 / 2 linkage, and hydraulic spools where necessary.
Verified Winton WFL Reviews
Collected from Tried & Tested Customers
Well made machine, does the job it’s designed for
Great service
Flail mower has been excellent. We use it all regularly to cut paddocks and to help cut up hedge trimmings. I give it 5/5. I guess I would now buy the version which allows for offset but its not limiting my use.
Thank you for your feedback, Geoff. The hydraulic offset WHF version of your flail mower will give you roughly 30cm more cut on the right-hand side. Fortunately for those with the fixed-position WFL model, it has a built-in offset as standard. This is due to the mower being central behind your tractor while having the belt drive on the left-hand side.
I’ve been very impressed with this Winton flail mower. It was very easy to attach to my old Fordson tractor, there was enough adjustment of mountings on the mower body to accommodate the wider hydraulic lift arms. The cutting blades are very robust and easily cut the toughest brambles and weeds as well as the grass in the 3 acre apple orchard and 6 acre adjacent field. It’s also very easy to clean and maintain. I used a rotary topper before this machine and was always having issues with it. I would highly recommend the Winton flail mower to anyone cutting a large area of grass that’s too long for a standard “ride-on”. I would rate this machine 5 out of 5!
Overall a nice piece of heavy duty kit with a few minor limitations. Can cut virtually any length** or type of grass / pasture. Ideal for tidying up woodland floor, removing brambles, generating paths. Can produce a near bowling green finish on lawns if required. Works best in dry conditions. Damp or wet grass cuttings will wrap around roller bearings and seize roller if not removed frequently. Scraper bar attached to roller largely ineffective. Always worth checking and cleaning roller and hammer blades after each use. ** a 2 foot cut easily achieved in two or three stages using tractor hydraulic lift. I would presently rate this machine 4 out of 5 but please note if the irritating problem with damp grass build up around roller bearings during operation can be solved I would give the Flail a 5 out of 5 rating.
Hi Gerald, thank you for your detailed feedback. While the WFL series of mowers can tackle pretty much any vegetation (wet or dry), exceedingly long, wet grass is the most difficult for it. The 2-foot grass you've been cutting is challenging for any machine, especially in the wet. We're glad you've tackled this by occasionally removing trapped grass. It is always easiest on a mower to cut in the dry. But for anything woodier than grass, or for grass that's regularly cut, wet conditions should not be a problem.
I am pleased with the WFL145 as it works well and seems good value. On the last outing however the drive belt burnt out which took me by surprise. Oil levels were fine so I'm not sure if it's down to me checking tension etc or something that I could expect. If that had not happened I would have given it a 5, since it did happen it's a 4.
Thank you for your feedback. The tension of the belts should be checked over time as they slowly stretch. After over a year of use, they will become looser and may burn out if not adjusted accordingly. The adjustment is simple and is performed via a single bolt that can be tightened/loosened with an everyday spanner. To check the tightness of the belts is within the correct range, hold the belt between the two pulleys and try to twist the belt. It should turn roughly 90 degrees. If you cannot twist it, it's too tight, and if you can exceed 90 degrees, it's too loose.
5 star rating. Very happy with machine. Would highly recommend both product and supplier.
Zaros did all that I expected and the machine I ordered arrived quickly and in good order. On a purchase of this value I prefer to speak to someone. However my email questions were responded to very rapidly and fully. But for this and the delivery being made on a large lorry which could not negotiate my gateway (despite my request for a small vehicle) I would award 5stars.
The mower works well and I have no complaints. I bought it to tidy up an area of rough tussocky grass land. Before I bought it I asked if my (newish Kubota)25 horsepower tractor would be adequate as a power source. I was assured it should be. Not really. This is not a complaint but I would suggest you tell prospective customers that 35 hp would be better. I just have to mow more frequently and/or take lighter cuts.
Thank you for your detailed feedback; I'm sure this will help future customers. I've looked through our 3-year-old conversations and seen a few questions, but nothing regarding tractor power or what you are cutting. Regardless, in this case, the WFL125 would have been the more suitable machine for this type of hard use if you aren't cutting regularly. 25hp is well suited to powering the WFL145 during, as you say, frequent/light cuts. For the harder vegetation, a slower forward speed is recommended to allow the mower time to cut. Tussock grass is a tough one for any machine to tackle, as it grows in incredibly dense mounds, but I'm glad that you've been able to keep on top of it by cutting more regularly.
Excellent all round service ,price and quality
Very responsive and helpful. Fast delivery.
Good quality mower sturdily built. Documentation is good with clear guide for pto shaft adjustment. Arrived within the stated delivery period on a truck that was able to deliver to rural Devon ( we requested ‘no articulated truck’ as it could not get to us and this was taken on board by the suppliers). Pleased with the kit and the service.
We spent all day Saturday cutting grass, and must say what a fantastic piece of kit. It left a perfect finish and did not miss anything, even in the rougher areas around the headland.
I just wanted to drop you a line of thanks, and say how pleased we are with the flail mower we bought from you. The flail is brilliant!
The most commonly asked WFL145 questions. If your questions is not here, please contact us.