Engine Horsepower: 74 hp
Manufactured: 1956 to 1958
John Deere 820 Summary
The John Deere 820 was produced from 1956 to 1958 and is part of the Two-Cylinder 20 Series. It was a standard-tread tractor manufactured in Waterloo, Iowa, with a total production of 7,080 units. The early "Green Dash" model provided 67 horsepower, while the improved "Black Dash" model in 1958 offered 75 horsepower.

John Deere 820 Horsepower, Weight, and Specifications:
Production
Where and when was the John Deere 820 tractor manufactured?
- Manufacturer: John Deere
- Standard-tread tractor
- Built in Waterloo, Iowa, USA
- Total built: 7,080
- The early model 820 \"Green Dash\" tractors were little-changed from the previous model 80. In 1957, for the 1958 production year, the improved 820 \"Black Dash\" tractors appeared with a number of modifications and more horsepower.
Engine
What engine specifications does the John Deere 820 have?
- John Deere 7.7L 2-cyl diesel
- Fuel tank: 32.5 gal (123.0 L)
- Aux. fuel: 0.25 gal (0.9 L)
Transmission
What type of transmission does the John Deere 820 have?
- 6-speed unsynchronized gear
Horsepower
What is the horsepower output of the John Deere 820?
- Belt (claimed): 67 hp (Green Dash) / 75 hp (Black Dash)
- Drawbar (tested): 67.15 hp (50.1 kW)
- Belt (tested): 72.82 hp (54.3 kW)
- Plows: 5-6
Mechanical
What are the mechanical features of the John Deere 820?
- Two-wheel drive
- Steering: manual (power optional)
- Open operator station. Steel cab optional.
Hydraulics
What type of hydraulic system does the John Deere 820 have?
- Type: Powr-Trol
- Valves: 1
Power Take-off (PTO)
What kind of PTO does the John Deere 820 tractor have?
- Rear PTO: independent
- Rear RPM: 540
Dimensions & Tires
What are the dimensions and tire sizes for the John Deere 820?
- Wheelbase: 85.25 inches (216 cm)
- Weight: 7850 to 8600 pounds
- Front tire: 7.50-18
- Rear tire: 15-34
Belt Pulley
What are the specifications of the belt pulley on the John Deere 820?
- Diameter: 12.2 inches (30 cm)
- Width: 9 inches (22 cm)
- RPM: 1125
- Speed: 3,600 ft/min (1097.28 meters/min)
Electrical
What are the electrical specifications for the John Deere 820?
- Ground: positive
- Battery volts: 6
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.