John Deere 6410 Specifications
Engine Horsepower: 104 hp
Manufactured: 1999 to 2002
John Deere 6410 Summary
The John Deere 6410, produced from 1999 to 2002, is a utility tractor from the 6000 TEN Series. It features a 104 hp engine with claimed PTO power of 90 hp. It was manufactured by John Deere in Mannheim, Baden-W\u00fcrttemberg, Germany. Variants include the 6410 utility tractor, the 6410L low-profile, and the 6410S low-profile cab.
John Deere 6410 Horsepower, Weight, and Specifications:
Production
Who manufactures the John Deere 6410?
- Manufacturer: John Deere
- Type: Utility tractor
- Production Years: 1999 to 2002
- Series: 6000 TEN Series
- Built in: Mannheim, Baden-W\u00fcrttemberg, Germany
Variants
What are the models of the John Deere 6410?
- 6410: utility tractor
- 6410L: low-profile
- 6410S: low-profile cab
Engine
What is the engine specification of the John Deere 6410?
- Model: John Deere 4.5L 4-cyl diesel
- Fuel tank (Standard on ROPS-equipped tractors): 30.7 gal (116.2 L)
- Fuel tank (Standard on cab tractors): 43.6 gal (165.0 L)
- Fuel tank (Optional on cab tractors): 48 gal (181.7 L)
Transmission
What transmission options are available for the John Deere 6410?
- 12-speed fully synchronized
- 16-speed four-speed power shift
- 24-speed four-speed power shift
Horsepower
What is the horsepower of the John Deere 6410?
- Engine (gross): 104 hp (77.6 kW)
- PTO (claimed): 90 hp (67.1 kW)
- Drawbar (tested): 74.8 hp (55.8 kW)
- PTO (tested): 98.0 hp (73.1 kW)
Mechanical
What are the mechanical features of the John Deere 6410?
- Drive: Two- or four-wheel drive
- Final drives: inboard planetary
- Steering: Power steering
- Brakes: Differential hydraulic wet disc brakes
- Two-post ROPS. ComfortGard cab optional with air-conditioning.
Hydraulics
What are the hydraulic specifications of the John Deere 6410?
- Type: closed center pressure-flow compensating
- Pressure: 2900 psi (200.0 bar)
- Valves: 1 to 4
- Pump flow: 25.4 gpm (96.1 lpm)
- Optional pump flow: 18.9 gpm (71.5 lpm)
Tractor Hitch
What are the tractor hitch specifications of the John Deere 6410?
- Rear Type: II
- Control: electronic lower-link draft sensing
- Rear lift: 5915 lbs (2683 kg)
- Front Hitch: optional
Power Take-off (PTO)
What are the PTO specifications of the John Deere 6410?
- Rear PTO: independent
- Rear RPM: 540/1000 (1.375)
Dimensions & Tires
What are the dimensions and tire specifications of the John Deere 6410?
- Wheelbase: 94.5 inches (240 cm)
- Weight: 7607 to 9680 pounds
- Front tire: 7.50-18
- 2WD Rear tire: 18.4-34
Electrical
What are the electrical specifications of the John Deere 6410?
- Ground: negative
- Charging system: alternator
- ROPS Charging amps: 90
- Cab Charging amps: 115
- Battery CCA: 830 (1230 optional)
- Battery volts: 12
- Battery AH: 110 (154 optional)
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
