Engine Horsepower: 67 hp
Manufactured: 2005 to 2008
John Deere 5325 Summary
The John Deere 5325 is a utility tractor produced from 2005 to 2008 as part of the 5025 Series. It has an engine with a gross power of 67 hp and a PTO power of 55 hp (claimed) and 57.27 hp (tested). It was manufactured in Augusta, Georgia, USA. The tractor comes in two variants: the standard 5325 utility model and the 5325N narrow-profile model.

John Deere 5325 Horsepower, Weight, and Specifications:
Production
Which company manufactures the John Deere 5325 utility tractor, and where is it made?
- Manufacturer: John Deere
- Type: Utility tractor
- Factory: Augusta, Georgia, USA
Variants
What variants exist for the John Deere 5325?
- 5325: Utility
- 5325N: Narrow-profile
Horsepower
What is the engine horsepower for the John Deere 5325, both gross and PTO?
- Engine (gross): 67 hp / 50.0 kW
- PTO (claimed): 55 hp / 41.0 kW
- PTO (tested): 57.27 hp / 42.7 kW
Engine
What type of engine does the John Deere 5325 utilize?
- Engine: John Deere 3.1L 5-cyl diesel
Mechanical
What are the key mechanical features of the John Deere 5325?
- Chassis: 4x2 2WD or 4x4 MFWD 4WD
- Final drives: Inboard planetary
- Differential lock: Mechanical rear
- Steering: Power
- Brakes: Differential hydraulic wet disc
- Cab: Open operator station with two-post folding ROPS. Optional isolated flat-platform (IOOS). Cab available with air-conditioning.
- Transmissions: 9-speed partially synchronized, 12-speed power shuttle, 24-speed two-speed power shift
Capacity
What are the fuel and hydraulic system capacities of the John Deere 5325?
- Fuel: 25 gal / 94.6 L (straddle), 33.5 gal / 126.8 L (IOOS/cab)
- Hydraulic system: 10.3 gal / 39.0 L (9-speed), 11.5 gal / 43.5 L (12-speed)
- Front hubs: 0.74 qts / 0.7 L each
- Front differential: 4.8 qts / 4.5 L
Hydraulics
What are the hydraulic specifications for the John Deere 5325?
- Type: Open center
- Capacity: 10.3 gal / 39.0 L (9-speed), 11.5 gal / 43.5 L (12-speed)
- Pressure: 2828 psi / 195.0 bar
- Rear valves: 1 to 3
- Mid valves: 0, 2 or 3
- Pump flow: 13.5 gpm / 51.1 lpm
- Total flow: 19.4 gpm / 73.4 lpm
- Steering flow: 5.9 gpm / 22.3 lpm
- Steering pressure: 1957 psi / 134.9 bar
Tractor Hitch
What are the hitch specifications for the John Deere 5325?
- Rear Type: II/I
- Control: Top-link draft sensing
- Rear lift (at 24\"/610mm): 3374 lbs / 1530 kg
Power Take-off (PTO)
What PTO options are available on the John Deere 5325?
- Rear PTO: Independent
- Clutch: Dry disc; Electro-hydraulic wet disc (24-speed)
- Rear RPM: 540; 540/540E (optional), 540/1000 (optional field conversion kit)
- Engine RPM: 540@2400, 540E@1700
Dimensions & Tires
What are the dimensions and tire specifications for the John Deere 5325?
- Wheelbase: 85.7 inches / 217 cm
- Weight range: 5350 to 6760 pounds
- Front tire: 7.50-16
- 2WD Rear tire: 14.9-28
Electrical
What are the electrical specifications for the John Deere 5325?
- Ground: Negative
- Charging system: Alternator
- ROPS Charging amps: 70
- Cab Charging amps: 90
- Battery CCA: 950
- Battery volts: 12
- Battery Group: BCI 31
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.