John Deere 5075M Specifications
Engine Horsepower: 75 hp
Manufactured: 2008+
John Deere 5075M Summary
The John Deere 5075M, produced from 2008 to 2022, is a utility tractor in the 5M Series from John Deere. It has a 75 hp engine and a claimed PTO power of 60 hp, with a tested PTO power of 65.58 hp. The tractor was manufactured in Augusta, Georgia, USA. The model originally priced at $38,512 for the 2WD ROPS and $49,182 for the 4WD cab version.
John Deere 5075M Horsepower, Weight, and Specifications:
Production
Who manufactures the John Deere 5075M and where?
- Manufacturer: John Deere
- Type: Utility tractor
- Factory: Augusta, Georgia, USA
- Original price: $38,512 (2009 2WD ROPS), $49,182 (2009 4WD cab)
Horsepower
What is the horsepower of the John Deere 5075M?
- Engine: 75 hp (55.9 kW)
- PTO (claimed): 60 hp (44.7 kW)
- PTO (tested): 65.58 hp (48.9 kW)
Engine
What engine does the John Deere 5075M use?
- Engine: John Deere 3.0L 5-cyl diesel
Mechanical
What are the mechanical features of the John Deere 5075M?
- Chassis: 4x2 2WD, 4x4 MFWD 4WD (optional)
- Final drives: Inboard planetary
- Differential lock: Shift-on-the-move electro-hydraulic rear differential lock
- Steering: Hydrostatic power
- Brakes: Hydraulic wet disc
- Cab: Foldable ROPS, Optional deluxe ROPS with upgraded seat, Optional cab with heat and air conditioning
- Transmissions: 16-speed partially synchronized, 12-speed partially synchronized, 16-speed partially synchronized with power shuttle, 32-speed
Capacity
What is the fuel and hydraulic capacity of the John Deere 5075M?
- Fuel: 22.3 gal (84.4 L) [ROPS], 31 gal (117.3 L) [cab]
- Hydraulic system: 11.9 gal (45.0 L)
- Front hubs: 0.84 qts (0.8 L) [each]
- Front differential: 5.3 qts (5.0 L)
Hydraulics
What are the hydraulic system specifications of the John Deere 5075M?
- Type: Open center
- Capacity: 11.9 gal (45.0 L)
- Pressure: 2828 psi (195.0 bar)
- Valves: 0, 2 or 3 (rear), 0, 2 or 3 (mid)
- Pump flow: 14.6 gpm (55.3 lpm)
- Total flow: 20.9 gpm (79.1 lpm)
- Oil type: -10\u00b0F [-23\u00b0C]\u2191: HY-GARD, -10\u00b0F [-23\u00b0C]\u2191: JDM J20C, 10\u00b0\u2194104\u00b0F [-12\u00b0\u219440\u00b0C]: BIO HY-GARD JDM 20D
- Steering flow: 6.3 gpm (23.8 lpm)
- Steering pressure: 1922 psi (132.5 bar)
Tractor Hitch
What is the hitch capacity of the John Deere 5075M?
- Rear Type: II/I
- Rear lift (at 24\"/610mm): 3,595 lbs (1630 kg), 4,498 lbs (2040 kg) [optional]
Power Take-off (PTO)
What are the PTO specifications for the John Deere 5075M?
- Rear PTO: Independent electrohydraulic
- Rear RPM: 540/540E, 540/540E/1000 (optional)
Dimensions & Tires
What are the dimensions and tire sizes for the John Deere 5075M?
- Wheelbase: 85.6 inches (217 cm)
- Weight: 6017 to 7800 pounds
- Front tire: 7.5-16
- Rear tire: 16.9-30
Electrical
What are the electrical specifications for the John Deere 5075M?
- Ground: Negative
- Charging system: Alternator
- Charging amps: 70 (ROPS), 90 (cab), 120 (optional)
- Battery CCA: 925
- Battery volts: 12
- Battery Group: 31
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
