John Deere 2510 Specifications
Engine Horsepower: 53 hp
Manufactured: 1965 to 1968
John Deere 2510 Summary
The John Deere 2510 was produced from 1965 to 1968, offering drawbar power of 46.82 hp and PTO power of 54.9 hp. Built in Waterloo, Iowa, USA, a total of 14,869 units of this row-crop tractor were manufactured. The tractor came in two main variants: the 2510 row-crop and the 2510HC high-crop.
John Deere 2510 Horsepower, Weight, and Specifications:
Overview
What is the John Deere 2510?
- Model: John Deere 2510
- Type: Row-Crop tractor
- Production Years: 1965 to 1968
- Location: Built in Waterloo, Iowa, USA
- Total Units Built: 14,869 (Row-Crop tractor)
- 8,023 (gas Syncro)
- 5,516 (diesel Syncro)
- 817 (diesel Power Shift)
- 513 (gas Power Shift)
Variants
Are there different versions of the John Deere 2510?
- 2510: Row-Crop
- 2510HC: High-Crop
Engines
What types of engines does the John Deere 2510 have?
- John Deere 3.0L 4-cyl gasoline
- John Deere 3.3L 4-cyl diesel
Transmissions
What transmissions are available for the John Deere 2510?
- 8-speed partially synchronized
- 8-speed full power shift
Horsepower
What is the horsepower of the John Deere 2510?
- Drawbar (tested): 46.82 hp (34.9 kW)
- PTO (tested): 54.9 hp (40.9 kW)
Mechanical
What are the key mechanical features of the John Deere 2510?
- Drive: Two-wheel drive
- Differential lock: Mechanical rear
- Power steering
- Hydraulic wet disc brakes
- Open operator station
Capacity
What are the fuel and hydraulic capacities of the John Deere 2510?
- Fuel: 26 gal (98.4 L)
- Hydraulic system (SyncroRange): 8 gal (capacity at service interval), 11 gal (dry system)
- Hydraulic system (PowerShift): 11 gal (capacity at service interval), 14 gal (dry system)
Hydraulics
What hydraulic system does the John Deere 2510 use?
- Type: Closed center constant pressure
- Capacity:
- 8 gal (SyncroRange) at service interval, 11 gal dry
- 11 gal (PowerShift) at service interval, 14 gal dry
- Pressure: 2250 psi (155.1 bar)
- Valves: 1 or 2
- Oil type: Deere 303
Tractor Hitch
What type of hitch does the John Deere 2510 have?
- Rear Type: II/I
- Control: Position and lower-link draft control
Power Take-off (PTO)
What are the PTO specifications for the John Deere 2510?
- Rear PTO: Independent
- Rear PTO Type: 540/1000 (1.375)
- Engine RPM:
- 540@2100
- 1000@2100
- Front PTO: Optional
- Front PTO Type: 1000
- Engine RPM: 1000@2100
Dimensions & Tires
What are the dimensions and tire sizes for the John Deere 2510?
- Wheelbase: 90 inches (228 cm)
- Weight: 6200 to 6745 pounds
- Front tire: 6.00-16
- Rear tire: 13.6-38
Electrical
What are the electrical specifications for the John Deere 2510?
- Ground: Negative
- Batteries:
- 1 (gas)
- 2 (diesel)
- Battery volts: 12
- Battery AH: 75
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
