Engine Horsepower: 44 hp
Manufactured: 1982 to 1989
John Deere 1250 Summary
The John Deere 1250 is a compact utility tractor produced from 1982 to 1989 with a gross engine power of 44 hp. It was manufactured by Yanmar in Japan and distributed by John Deere. The tractor variant includes two-wheel and four-wheel drive options.

John Deere 1250 Horsepower, Weight, and Specifications:
Production
Who manufactured the John Deere 1250 tractor and where was it built?
- Distributor: John Deere
- Manufacturer: Yanmar
- Type: Compact Utility tractor
- Built in: Japan
- Original price: $14,295 (1983 2WD), $18,795 (1983 4WD), $18,700 (1988)
Engine
What kind of engine does the John Deere 1250 have?
- Engine: Yanmar 2.3L 3-cyl diesel
- Fuel tank: 17.2 gal (65.1 L)
Transmission
What type of transmission does the John Deere 1250 use?
- Type: 9-speed sliding gear
Horsepower
What is the horsepower specification of the John Deere 1250?
- Engine (gross): 44 hp (32.8 kW)
- PTO (claimed): 40 hp (29.8 kW)
- Drawbar (tested): 33.44 hp (24.9 kW)
- PTO (tested): 40.70 hp (30.3 kW)
Mechanical
What are the mechanical features of the John Deere 1250?
- Drive: Two- or four-wheel
- Final drives: inboard planetary
- Differential lock: mechanical
- Steering: power assist
- Differential brakes: hydraulic wet disc
- ROPS: Two-post, canopy optional
Hydraulics
What hydraulic specifications does the John Deere 1250 have?
- Type: open center
- Valves: 0 to 2
- Pump flow: 11.2 gpm (42.4 lpm)
- Total flow: 15.9 gpm (60.2 lpm)
- Steering flow: 4.7 gpm (17.8 lpm)
Tractor Hitch
What kind of hitch does the John Deere 1250 have?
- Rear Type: II/I
- Control: center-link draft sensing with position and control
- Rear lift (at 24\"/610mm): 2240 lbs (1016 kg)
Power Take-off (PTO)
What are the specifications of the PTO on the John Deere 1250?
- Rear PTO: continuous
- Rear RPM: 540
Dimensions & Tires
What are the dimensions and tire sizes of the John Deere 1250?
- 4WD Wheelbase: 78 inches (198 cm)
- Weight: 4125 to 5090 pounds
- Front tire: 6.50-16
- 2WD Rear tire: 13.6-28
Electrical
What are the electrical specifications of the John Deere 1250?
- Ground: negative
- Charging system: alternator
- Charging amps: 25
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.