Quadraplay Grass Care System Manual - SCH 4GCS
Learn about the SCH 4GCS Quadraplay Grass Care System, designed for grooming sports pitches with features like adjustable slitters, brushes, and rakes, including setup, operation, and maintenance tips.
View Product: SCH 4GCS Combination Turf Groomer
Introduction to SCH 4GCS Quadraplay Grass Care System
The SCH 4GCS Combination Turf Groomer is a versatile, three-point linkage mounted unit designed for grooming sports pitches and other turf areas. It incorporates a slitter, brush, and rake all adjusted via jack legs for depth and pressure, along with a rear roller for surface firming and creating stripes. Here’s how to set up, use, and maintain your Quadraplay Grass Care System.
Operation Steps for SCH 4GCS Quadraplay
Attaching to Tractor
- Attach the unit to your tractor using the bottom and top link pins. Ensure that the unit is properly secured.
Leveling the Unit
- After attachment, check that the unit is level for uniform operation across the surface.
Adjusting Implements
- Adjust the height and pressure of each implement (slitter, brush, and rake) using the jack legs. To adjust, remove the ‘D’ clips, set the implements to the desired height, and then replace the ‘D’ clips to secure.
Ready to Operate
Once all adjustments are made and the unit is securely attached and level, the groomer is ready for use.
Safety Instructions for Using SCH 4GCS Quadraplay
- Always ensure the area is clear of people before starting work.
- Never allow people to ride on the unit.
- Never leave the unit in a place where someone could trip or walk into it.
- Do not exceed speeds of 15 kph to ensure control and safety.
- Avoid turning the unit while the implements are in contact with the ground to prevent damage to both the equipment and the turf.
Maintenance of SCH 4GCS Quadraplay
Cleaning
Clean the unit thoroughly after each use to remove dirt and grass clippings, which can hinder performance and cause premature wear.
Tightening Components
Regularly check and tighten all nuts and bolts to keep the unit stable and safe during operation.
Lubricating
Periodically grease the jack legs to ensure smooth adjustments and prevent rust or corrosion.
Spare Parts
Keep spare parts such as wheels, wheel bearings, spring tines, brushes, roller bearings, and ‘D’ clips for the jack legs on hand to quickly address any wear or damage.
Conclusion
Properly setting up, operating, and maintaining the SCH 4GCS Quadraplay Grass Care System ensures effective grooming and maintenance of sports pitches and turf areas. By adhering to the operational guidelines and safety instructions, you can achieve the best results while extending the lifespan of your equipment.
Important:
Please refer to the manufacturer's official manual before using this product or carrying out repairs.