60" Grass Care System for Tractors Manual - SCH DMF

Introduction to SCH DMF Turf Care System

The SCH DMF Turf Care System is a comprehensive grass maintenance solution, designed for professional use on paddocks, golf courses, football pitches, and race tracks. Below is a detailed guide on how to operate it and attach various additional tools.

Assembly and Preparation of SCH DMF Turf Care System

Frame Setup

The DMF frame is equipped with a category 1 three-point linkage for standard tractor mounting. In case of different tractor links, ensure compatibility.

Installing Attachments

Attachments such as the Aerator (DAM), Slitter (DSM), DSM2 with replaceable tines, Sorrel Roller (DSR), and others should be oriented with their turning curve pointing towards the ground.
Lift and lower the frame over the attachment and manually maneuver the attachment into place.
Secure the attachment using the bearing holding bolt and tighten all nuts and bolts accordingly.

Types of Attachments and Their Uses

• Aerator (DAM): Used for breaking down the surface pan to improve drainage and air penetration. Equipped with nine heavy-duty aeration discs, it penetrates up to 180mm in suitable conditions.
• Slitter (DSM): Helps improve drainage and root growth. It features nine heavy-duty slitter 'stars' and can achieve penetration up to 125mm.
• Slitter with Replaceable Tines (DSM2): Features slender hardened blades for clean soil penetration, minimizing turf damage.
• Hollow Tine Corer (DHTC): Removes soil cores to improve air and water access to the roots. The rear roller must be removed when using the DHTC.
• Sorrel Roller (DSR): Ideal for spiking the surface of fine turf prior to reseeding.
• Dethatching Rake (DDTC): Removes thatch and dead grass, promoting healthy growth.

Safety Instructions for SCH DMF Turf Care System

• Ensure the system is firmly fixed to the towing vehicle when in use.
• Be aware of surroundings and avoid using near people.
• Do not exceed speeds that allow the unit to bounce.
• Avoid reversing with the tines in contact with the ground.
• Always operate along straight lines and avoid sharp turns when attachments are in the ground.

Performance Tips for SCH DMF Turf Care System

• Only operate on sufficiently moist turf to allow easy tine penetration.
• Add weight to the tray if needed to aid depth penetration but avoid over-ballasting.
• Use the scraper bar fitted to the rear roller to keep it clean of mud and obstructions.

Maintenance of SCH DMF Turf Care System

• Regularly tighten linkage pins and check all fixture points.
• Wash down the unit and attachments after use to remove dirt and debris.
• Service the running and roller bearings twice a year; avoid using power grease guns.

Conclusion

By following these guidelines, operators can efficiently use the SCH DMF Turf Care System to maintain various types of grassed areas effectively, ensuring high-quality turf management throughout various seasons. Always consider the specific requirements of each attachment and handle them safely to optimize their utility and prolong their lifespan.

Important:

Please refer to the manufacturer's official manual before using this product or carrying out repairs.