CaseIH 4210 Specifications
Engine Horsepower: 72 hp
Manufactured: 1994 to 1997
CaseIH 4210 Summary
The CaseIH 4210 was produced from 1994 to 1997 as part of the 4200 Utility Series. It is a utility tractor with engine horsepower ranging from 68 hp to 72 hp. It was manufactured by CaseIH in Doncaster, England. Variants include 4x2 2WD and 4x4 MFWD 4WD configurations, with multiple transmission options such as 8-speed synchromesh and 16-speed partial power shift.
CaseIH 4210 Horsepower, Weight, and Specifications:
Production
Who manufactured the CaseIH 4210 and where was it made?
- Manufacturer: CaseIH
- Type: Utility tractor
- Factory: Doncaster, England
- Original price: $26,000 (1997)
Horsepower
What is the horsepower of the CaseIH 4210?
- Engine (gross): 72 hp / 53.7 kW
- Engine (net): 68 hp / 50.7 kW
- PTO (claimed): 62 hp / 46.2 kW
- Drawbar (tested): 52.90 hp / 39.4 kW
- PTO (tested): 61.02 hp / 45.5 kW
Engine
What type of engine does the CaseIH 4210 have?
- Type: Case 3.9L 4-cyl diesel
Mechanical
What are the mechanical features of the CaseIH 4210?
- Chassis: 4x2 2WD / 4x4 MFWD 4WD
- ROPS Differential lock: mechanical
- Cab Differential lock: electro-hydraulic
- Steering: power
- Brakes: hydraulic wet disc
- Cab: Two-post ROPS, Cab optional with air-conditioning
- Transmissions: 8-speed synchromesh, 8-speed shuttle, 16-speed partial power shift, 16-speed synchromesh creeper
Capacity
What is the fuel and hydraulic capacity of the CaseIH 4210?
- ROPS Fuel: 20 gal / 75.7 L
- Cab Fuel: 29.6 gal / 112.0 L
- Hydraulic system: 9 gal / 34.1 L (2WD), 9.7 gal / 36.7 L (cab)
Hydraulics
What are the hydraulic specifications of the CaseIH 4210?
- Type: open center
- Capacity: 9 gal / 34.1 L (2WD), 9.7 gal / 36.7 L (cab)
- Pressure: 2500 psi / 172.4 bar
- Valves: 0 to 3
- Total flow: 16.1 gpm / 60.9 lpm, 18.4 gpm / 69.6 lpm *Optional
Tractor Hitch
What type of hitch and lift capacity does the CaseIH 4210 have?
- Rear Type: II
- Control: draft and position control
- Rear lift: 3,665 lbs / 1662 kg
Power Take-off (PTO)
What are the PTO specifications of the CaseIH 4210?
- Rear PTO: independent
- Clutch: hydraulic wet disc
- Rear RPM: 540, 540/1000 *Optional
Dimensions & Tires
What are the dimensions and tire sizes of the CaseIH 4210?
- 2WD Wheelbase: 88.7 inches / 225 cm
- 4WD Wheelbase: 88 inches / 223 cm
- Weight: 6327 to 7085 pounds
- Front tire: 7.50-16
- Rear tire: 16.9-28 (2WD)
Electrical
What are the electrical specifications of the CaseIH 4210?
- Ground: negative
- Charging system: alternator
- Charging amps: 45, 65 *65A alternator standard with cab, optional with ROPS
- Battery CCA: 650, 810 *Optional
- Battery volts: 12
Disclaimer: The information provided on this page may be less than 100% accurate. Always check the manufacturer's official manual.
